BELAJAR CISCO -> CARA SETINNGS TELNET CISCO / REMOTE ACCESS TELNET
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname JAKARTA
JAKARTA(config)#username yoga secret yoga123
JAKARTA(config)#line console 0
JAKARTA(config-line)#login local
JAKARTA(config-line)#^Z
JAKARTA#exit
User Access Verification
Username: yoga
Password:
JAKARTA>en
JAKARTA#conf t
Enter configuration commands, one per line. End with CNTL/Z.
JAKARTA(config)#banner motd #
Enter TEXT message. End with the character '#'.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
SELAMAT DATANG DI ROUTER JAKARTA
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
#
JAKARTA(config)#exit
JAKARTA#
JAKARTA#exit
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
SELAMAT DATANG DI ROUTER JAKARTA
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
User Access Verification
Username:
Username: yoga
Password:
JAKARTA>en
JAKARTA#conf t
Enter configuration commands, one per line. End with CNTL/Z.
JAKARTA#no ip domain-loocup
JAKARTA(config)#int Gig0/1
JAKARTA(config-if)#ip add 192.168.20.1 255.255.255.0
JAKARTA(config-if)#no sh
JAKARTA(config-if)#exit
JAKARTA(config)#line vty 0 4
JAKARTA(config-line)#enable secret test
JAKARTA(config)#enable secret test
JAKARTA(config)#service password-encryption
JAKARTA(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/1, changed state to up
pasang Ip PC 192.168.20.2 dan getway 192.168.120.1 (lakukan telnet)
maka hasilnya
